The CTT guide library

Find your guide.
Get into the field.

From your first setup to your next deployment. Find instructions
for your equipment, your data, and everything in between.

Try , , or

Not sure where to start?

Choose what you’re getting ready to do.

01Set up a receiving station

Start with your station, then add the components in your system.

  1. Set up your SensorStation
  2. Add Node V3, Node V2, or a BlūSeries Receiver, if included
  3. Prepare tags and verify detections
02Prepare tags for deployment

Choose the instructions that match your transmitter.

  1. Identify, activate, and test radio tags
  2. For a leg-band model, also read attachment instructions
  3. Using GPS? Start with Flicker or ES-400.
03Track tags in the field

Sidekick is CTT’s handheld receiver and replaced the discontinued Locator.

  1. Set up your Sidekick with CTT Mobile
  2. Confirm your radio tag is ready
  3. Get the CTT Mobile app

All guides

13 guides

Receiving station
Start here

SensorStation

Set up your fixed receiving station, connect antennas and power, get online, and check tag detections before heading into the field.

For: CTT SensorStation; version-specific notes inside

  • Station setup
  • Connectivity
  • Tag detections
Radio transmitters
434 MHz + 2.4 GHz

Coded Radio Tags

Identify your tag family, prepare and activate your tags, and confirm detections with the appropriate receiver before deployment.

For: LifeTag, PowerTag, HybridTag & BlūSeries

  • Tag identification
  • Activation
  • Pre-deployment testing
Field receiver
V3 hardware only

Node V3

Assemble and deploy your Node V3, connect with SensorStation and CTT Mobile, retrieve SD card data, and update firmware.

For: Node V3; 4 W & 5 W solar power supplies

  • Mounting & power
  • CTT Mobile
  • Data & firmware
Station accessory

BlūSeries Receiver

Add BlūSeries tag reception to your SensorStation. Covers assembly, Ethernet connection, antenna setup, testing, and access to detections.

For: BlūSeries Receiver connected to a SensorStation

  • Assembly
  • Station connection
  • BlūSeries data
Handheld tracking

Sidekick

Pair your Sidekick with CTT Mobile to detect and track tags in the field. Covers antennas, compass calibration, mapping, and charging. Sidekick replaces the discontinued Locator.

For: CTT Sidekick with the CTT Mobile app

  • Phone pairing
  • Tag tracking
  • Map view
GPS & cellular

Flicker GPS

Understand GPS and cellular locations, prepare your Flicker for deployment, and learn how power, charging, and device settings affect operation.

For: CTT Flicker GPS transmitters

  • GPS & cell locations
  • Charging
  • Deployment prep
Field receiver
V2 hardware only

Node V2

Set up and mount your Node V2, pair it with SensorStation, and use the V2 firmware update tools. These instructions apply only to V2 hardware.

For: Node V2 hardware and V2 update tools only

  • Initial setup
  • Station pairing
  • V2 firmware
Radio transmitters

Coded Radio Leg Bands

Prepare, attach, and remove a CTT radio leg band. Start with the instructions for the LifeTag, PowerTag, or HybridTag built into your band.

For: CTT leg bands with embedded 434 MHz tags

  • Tag preparation
  • Band attachment
  • Band removal
GPS & cellular

ES-400

Unpack, store, and prepare your ES-400 for deployment. Covers device care, duty cycles, fitting considerations, and getting access to your data.

For: CTT ES-400 GPS/cellular transmitters

  • Care & storage
  • Deployment
  • Duty cycles
Handheld tracking
Legacy · discontinued

Locator

For existing Locator owners: charging, assembly, Wi-Fi connection, and the browser-based tracking interface. Locator is discontinued and has been replaced by Sidekick.

For: Existing CTT Locator hardware only

  • Assembly & charging
  • Wi-Fi connection
  • Tracking interface
Network & collaboration

Getting Started with Motus

Understand how the Motus Wildlife Tracking System works and what joining involves, including project coordination, receiving stations, and data sharing.

For: Researchers and station hosts exploring Motus

  • Network overview
  • Joining Motus
  • Data sharing
Data & software
Beta portal guide

CTT Web Portal

Tour the beta portal described in this guide: projects, device panels, maps, charts, and data downloads. Use the portal assigned to your devices.

For: The beta interface documented for ES-420 devices

  • Projects & devices
  • Maps & charts
  • Data downloads
Station maintenance

SensorStation Disk Image

Install a SensorStation operating-system image on its compute module. Covers choosing an image, computer software requirements, and flashing steps.

For: CTT SensorStation; select the image for your hardware

  • Image selection
  • Software requirements
  • Compute module flashing

Tools for your next step

Apps, firmware, and resources to use alongside your guides.